![TFW-G-0043](https://akadako.com/grove/assets/TFW-G-0043/picture.png)
Description
The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is an IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter. The IR detector have a demodulator inside that looks for modulated IR at 38 KHz. The Infrared Receiver can receive signals well within 10 meters. If more than 10 meters , the receiver may not get the signals. We often use the two Groves-the Infrared Receiver and the Grove - Infrared Emitter to work together.
![](https://akadako.com/grove/assets/TFW-G-0043/program_en.png)
Program:https://akadako.com/grove/assets/TFW-G-0043/program.sb3
How to use SB3 file
After downloading sample SB3 file on this page, go to Xcratch or Stretch3. Click on "Load from your computer" and select the file you downloaded to open it. After opening the file, connect AkaDako to your PC and check the operation of the sensors and actuators.
![How to use sb3 file](https://akadako.com/wp-content/themes/akadako/img/how-to-sb3_en.png)