![TFW-G-0012](https://akadako.com/grove/assets/TFW-G-0012/picture.png)
Description
The Grove - Slide Potentiometer module incorporates a linear variable resistor with a maximum resistance of 10KΩ. When you move the slider from one side to the other, its output voltage will range from 0 V to the Vcc you apply. It connects to the other Grove modules through a standard 4-Pin Grove Cable. Three of the pins are connected to OUT (Pin 1), Vcc (Pin 3) and GND (Pin 4), while the fourth pin (Pin 2) is connected to a on-board green indicator LED.
![](https://akadako.com/grove/assets/TFW-G-0012/program_en.png)
Program:https://akadako.com/grove/assets/TFW-G-0012/program.sb3
How to use SB3 file
After downloading sample SB3 file on this page, go to Xcratch or Stretch3. Click on "Load from your computer" and select the file you downloaded to open it. After opening the file, connect AkaDako to your PC and check the operation of the sensors and actuators.
![How to use sb3 file](https://akadako.com/wp-content/themes/akadako/img/how-to-sb3_en.png)